Friday 30 September 2016

C90 Christmas Snow 
Card By Ada Nicholls D T



Requirements:

Paper: C90 005 – stocking and bells/red
            C90 003 – Santas helper – white wood grain/red
            C90 007 -   Wreaths/trees  
 
Stickers : ST90 002 – Wreath stickers


Instructions:

·         Use the Red pattern and cut a piece 9 x 7 ‘’. Fold it in half lenght wise.
·         Use the woodgrain pattern and cut a piece 4 ¼ x 6 ¾ ‘’. Stick on the red pattern on the front.
·         Use the large Santa and cut it out. Stick on teh front of the card.
·         Add the fuzzy cut wreaths.
·         Add the stickr for the title.
·         Use a template – make a pointsettia using plain cardstock.
·         Add a pearl in the centre.
·         Add on the card.


CHRISTMAS SNOW COLLECTION
Snow Globe – Season of Joy
-Tanya Cloete-



For This Project You Will Need:

·         FabScraps Christmas Snow Collection paper range : C90 001, 002, 004, 006 & 008
·         FabScraps Sticker Sheet ST90 002
·         Silhouette Cameo
·         Circle Punch 1.5”
·         Plastic Globe
·         White & Red Cardstock
·         Glossy Accents
·         Ranger Embossing Powder Rich Red
·         Metal Embellishments, Eyelet, White Flat Back Pearls, Leaves, Snow, Plastic Circle, Wooden Sleigh, Stamens, Ribbon & Trims

Instructions:
1.      Silhouette Cameo:
·         Cut a round box from sheet 004 & 008 as per the picture and assemble. Add a strip from sheet 001 to the bottom and white flat back pearls underneath the lid.
·         Cut a poinsettia from sheet 004 & 008. Assemble and add stamens to the centre.
2.      Emboss the wooden sleigh with rich red.
3.      Fussy cut a stocking from sheet 006. Add to poinsettia.
4.      Fussy cut a few snowmen from sheet 002 and a mushroom from sheet 004. Add glossy accents and snow as per the picture. Leave to dry. Adhere one of the snowmen to the sleigh.
5.      Glue the plastic circle to the lid of the round box and add ribbon around it.
6.      Glue the sleigh with the other snowmen to the bottom, inside the circle and add snow.
7.      Glue the globe on top and add white flat back pearls around the centre as per the picture.
8.      Add sticker 002 (Season of Joy) onto white cardstock. Punch with circle punch. Mat onto red and white. Add eyelet.
9.      Arrange all the pieces and embellishments as you like or as per the picture and glue!
10.  All Done!





CHRISTMAS SNOW COLLECTION
Star – Peace on Earth
-Tanya Cloete-



For This Project You Will Need:

·         FabScraps Christmas Snow Collection paper range : C90 002, 004, 005 & 007
·         FabScraps Chipboard Pieces : DC90 003, 009 & 011
·         FabScraps Sticker Sheet ST90 001
·         Silhouette Cameo
·         White Cardstock
·         Glossy Accents
·         Diamond Stickles
·         Tim Holtz Distress Ink Fired Brick and Picket Fence
·         Embellishments, White Flat Back Pearls, Angel, Diamond String White Pom-Poms & Trims

Instructions:
1.      Silhouette Cameo:
·         Cut a 3D star from sheet 002 & 007 as per the picture and assemble. Add the white flat back pearls and white pom-poms. Add the diamond string thought the holes on top with embellishments.
·         Cut 2 poinsettias from sheet 004 & 005. Assemble.
·         Cut 4 pine boughs from sheet 004.
2.      Mat sticker 002 onto white cardstock and add some diamond stickles.
3.      Ink chipboard piece 003 with fired brick (top and bottom section) and picket fence (middle). Add glossy accents and leave to dry.
4.      Ink chipboard piece 009 with picket fence and add diamond stickles.
5.      Ink chipboard piece 011 with fired brick (leaves) and picket fence (swirls). Add the white flat back pearls.
6.      Add diamond stickles to the wings of the angel and leave to dry.
7.      Arrange all the pieces and embellishments as you like or as per the picture and glue!
8.      All Done!







CHRISTMAS SNOW COLLECTION
Page Layout – The Night Before Christmas
-Tanya Cloete-




For This Project You Will Need:

·         FabScraps Christmas Snow Collection paper range : C90 003, 004 & 008
·         FabScraps Chipboard Pieces : DC90 002
·         FabScraps FAB Stencil DS 059
·         Silhouette Cameo
·         Martha Stewart Doily Punch
·         Chipboard Frame
·         White, Red & Green Cardstock
·         Martha Stewart Acrylic Paint Green Gold
·         White Acrylic Paint
·         Modeling Paste
·         Glossy Accents
·         Ranger Embossing Powder White & Red
·         Embellishments, White Flat Back Pearls, Snow, Stamens, Wooden Birds & Trims

Instructions:
1.      Silhouette Cameo:
·         Cut 2 poinsettias from sheet 004 & 008. Assemble and add stamens to the centre.
·         Cut 6 pine boughs from green cardstock.
2.      Trim sheet 008 to fit the white cardstock that will be used as the base.
3.      Trim sheet 004 to fit sheet 008 leaving a border. Cut sheet 004 into two (top section) leaving a space. Punch with doily punch on both sides as per the picture and adhere.
4.      Mix modeling paste with green gold paint and add to sheet 004 using stencil 059 as per the picture. Leave to dry. Add the white flat back pearls.
5.      Add glossy accents with snow to the bottom section of sheet 004 as per the picture and leave to dry.
6.      Paint the chipboard frame with white paint. Add a piece of red cardstock behind it.
7.      Emboss chipboard piece 002 with red.
8.      Emboss the birds with white.
9.      Arrange all the pieces and embellishments as you like or as per the picture and glue!
10.  All Done!


C90 Christmas Snow
Christmas gift boxes
Michelle Frisby




For This Project You Will Need

   FabScraps CM90 001A card makers pack
   FabScraps  C90 005 Stockings and  Bells
   Muslin [cheesecloth], cardstock, flowers
   Metal foliage dies and snowflakes and a cutting machine
   Corrugated cardboard packaging
   Alene’s True Snow and a paintbrush
   Christmas baubles
   Christmas sentiments
   White cardstock
   Hole punch
   Seam binding


Instructions for your tag
1.              Use C90 005 and a variety of pieces of patterned paper 6” x 6” square from your card makers pack and make into a box – just the bottom half.
2.            Cut two pieces of white cardstock 2 ¼” x 4 ¼” and make two white cardstock tags.
3.            Cover these tags using C90 001A.
4.            Adhere a tag on either side of the box.
5.             Punch a hole in each tag, score from side to side of each tag [see photo], tie and thread some seam binding to close.
6.            Cut several leaves, foliage pieces, sentiments, snowflakes.
7.             Grab a small piece of muslin and adhere to a piece of corrugated cardboard. And then add those leaves and foliage pieces and then top with a flower then adhere snowflake die cuts and baubles.
8.            Grab some Aleene’s True Snow and a paintbrush and randomly apply.
9.            All done.

Now that you have mastered your first Christmas gift box, how about you make a set of 24 of them and use them as this year’s Christmas Advent calendar – tuck some wee treasures into each of them and number them.


Merry Christmas.



C87 Journey in Time
 ‘Happy’ layout  
by Michelle Frisby


For This Project You Will Need

   FabScraps Journey in Time C87 006
   FabScraps Journey in Time C87 002
   FabScraps Journey in Time C87 001
    FabScraps stencil  DS 054
    FabScraps compass shapes and luggage ticket shape
    FabScraps chipboard DC87 003 – happy snaps word
   Muslin [cheesecloth], cardstock, leaves and flowers
   Corrugated cardboard packaging
   Gesso and a paintbrush
   Faber-Castelli Pitt big brush pen
   Modelling paste
   Background stamp and black Staz On ink pad
   Water colour crayons and water brush
   Flowers


Instructions for your tag
1.              Use C87 001 as your background paper. 
2.            Use FabScraps stencil and modelling paste and apply to the edges of each side of your 12x12 base paper.
3.            Use a background stamp and black Staz On ink stamp around the edges of your background paper.
4.            Take a piece of C87 006 and cut a few of the purple colour strips that look similar to corrugated cardstock and a piece of the strips of the window shapes and keep aside.
5.             Take a piece of C87 002 and cut two rectangles a little bigger than the photo you have chosen to scrap.
6.            Cut two pieces of corrugated cardboard packaging and adhere them under each of the two rectangles.
7.             Now start to build your embellishment cluster and build up your layers of papers – after I have cut my purple strips I have just torn each end of the papers for a little texture.   Alternate between your strips and rectangles. You can see I have popped under the compass shapes.
8.            In between a few layers of the papers I have added a little muslin [cheesecloth for additional texture and to add another layer.
9.            I have used some water colour crayons and my water brush and painted a little blue colour around my embellishment cluster – I have also used a fan brush and flicked [splattered] a little more colour – randomly – no rhyme nor reason.
10.        Once painted area has dried I have applied a little more stamping.
11.          I have cut the chipboard word happy snaps into two pieces and on this layout have used the word ‘happy’.  I have coloured it in using a black PITT artist pen – big brush pen.
12.        Down on the right hand side of have adhered one of the luggage tag tickets, added a wee note about where the photo was taken, a little more colour, stamping, muslin and a flower.
13.        Grab some gesso and a paintbrush and randomly apply.
14.        All done.